Piccard Mariana
Marine dynamics for NVIDIA Isaac Sim
Mariana adds the water to Isaac Sim: buoyancy, drag and added mass on the vehicle, and the thrust from its actuators, applied at every simulation step.
Each run keeps its commands, forces and estimates, so you can work out why it passed or failed and repeat it from a fresh start.
Where Mariana fits
Isaac Sim runs the physics engine, renders the camera images and holds the scene. Mariana supplies the forces from the water and turns actuator commands into thrust on the vehicle.
- In a sensor-driven run, ground truth goes to the scorer, not back into the control loop.
Model how the vehicle moves
Mariana models your vehicle as a rigid body moving through water.
- You give it the mass and inertia, the buoyancy and where it acts, translational and rotational drag, and the added mass: the water the vehicle has to push along with it.
- Added mass is coupled across all six degrees of freedom, and you can see what each force and moment contributes to the motion.
- Mariana doesn't compute the flow around your hull the way a CFD solver would; it applies the parameters you give it.
Currents that vary in space and time
Give Mariana a current that changes from place to place and moment to moment, and it computes the marine forces from the water where the vehicle actually is.
- You prescribe the flow as a function of position and time. At each step Mariana samples it at the vehicle's centre of mass; with added mass, you also supply how the flow changes in time and across space.
- A measured or precomputed wake can be the input. Mariana applies the flow you give it; it doesn't generate wakes or solve the flow the way a CFD solver would.
- The bundled CPU example is a pulsing jet: fastest along its centreline, slower to either side, rising and falling over time. Varying current applies to fully submerged bodies.
Drag and pressure in non-uniform flow
When the current differs from one side of the hull to the other, so does the drag. Mariana can sample the flow at points you choose on the hull, and the difference becomes a turning moment.
- Each hull sample point carries a share of the vehicle's drag at its own local water speed. In a shear layer the shares differ, so a body can start to turn even from rest.
- Ambient pressure loading is a separate, opt-in force. When the surrounding water accelerates, its pressure gradient pushes on the displaced volume, even on a neutrally buoyant body drifting with the flow.
- The pressure force comes from the gradient you supply or from the flow's velocity derivatives, applied at the centre of buoyancy. It isn't integrated across the hull.
From command to thrust
What a controller asks for and what actually pushes the vehicle can differ.
- Each actuator maps onto the vehicle through a supported interface, with explicit units, frames, mounting points and timing.
Test approaches and holds
Touching the target once isn't a hold. A run passes only on the criterion you declared before it started.
- Each run keeps the gains that were actually active, the estimator's drift, the integrator and its resets, and the actuator effort.
- A process that finished isn't a mission that succeeded. If a run was cut short or the vehicle touched the floor, the report says so.
Geometric sonar
- A forward-looking imaging sonar returns intensity by bearing and range. Whatever stands in the way casts an acoustic shadow over everything behind it.
- A profiling multibeam returns the slant range, travel time and intensity of the nearest hit for each beam: a profile of the bottom across the track.
- Seeded speckle and a single reflected path are optional models. Intensity, speckle and multipath aren't calibrated against a real sonar, and refraction, phase and full acoustic propagation aren't simulated.
Contact
Hovering clear of the dock, touching it, seating in it and latching onto it are four different outcomes.
- Seating and latching mechanics aren't modeled in this release, so neither is reported as an outcome.
- Contact studies use zero added mass, because PhysX resolves collision impulses with the body's dry inertia. Mariana can compute the forces for several bodies in one batch and submit them to Isaac Sim in a single call.
One marine layer, different vehicles
A hovering vehicle holding station and a forward-flying AUV running waypoints and depth steps use the same marine layer, each described by its own parameters.
Compare controllers, check your model
Sometimes the honest outcome is a rejected candidate or a rejected fit, and it stays on the record with every other result.
- Run a baseline and a candidate controller under matched conditions, with their internal state and resets in view.
- For the model, estimate only the parameters your data can actually identify, mask out the stretches that don't count, and test the fitted model on data it never saw.
Run it again
You can go back to any number and see what produced it.
- Each result keeps its configuration, fresh-state repeats, the source, runtime, model and scorer versions, raw traces, metrics, plots and recordings.
- We don't promise identical results on different hardware, or real-time speed.
Two workflows
Docking from what the camera sees
A hovering vehicle approaches a station in stages, steering on the dock position its detector estimates from rendered images, then holds. Clearance, contact and the hold are reported run by run.
Depth control in forward flight
A forward-flying AUV runs waypoints and depth steps. You compare controller settings over repeated runs of the same profile, estimate the parameters the data can identify, and check the fitted model on data it didn't see.
Questions
- Is Mariana a simulator?
- No. Isaac Sim is the simulator. Mariana is the marine dynamics layer you use with it.
- Does a pass in Mariana prove my vehicle will work at sea?
- No. Numerical qualification, comparison with another simulator, parameter calibration and tests on the real vehicle are separate levels of evidence. A pass in Mariana is a simulation result, not a sea trial.
Want to see whether Mariana fits your vehicle?
Tell us about your vehicle and what you want to test.